[Automated Refraction System]

Download brochure (PDF)                                   Get a Quote

Copyright 2007 AL100 Automated Refraction System is a registered trademark of Tomey Corporation. All rights reserved. Specifications are subject to change without notice.  Any products mentioned herein are registered trademarks of their respective owners.                                                                                     5/07

Measure axial length quickly and easily
The AL-100 is designed for fast, simple operation.
Tone-assisted measurement notifies the operator when
the probe is aligned and measurements recorded. The
AL-100 takes up to 15 readings, and displays and
averages the best ten (10) readings for use in the IOL
calculation. The AL-100 measures axial lengths from
15-40 mm with an accuracy of 0.1 mm and a resolution
of 0.01 mm. Eye modes include Normal, Aphakic,
Pseudophakic and Dense cataract. Measurements may
be acquired automatically or manually and in Contact or
Immersion modes.

IOL Power Calculations
The AL-100 calculates IOL power with a vast array of
formulas: SRK II, SRK/T, Holladay, Haigis Standard, Haigis
Optimized, and Showa.  Other formulas may be added
as well. The AL-100 can display up to two lens constants
and the corresponding IOL powers. Up to 10 lenses and
lens constants can also be stored for use (along with the
corresponding Surgeon Factor, SF).

Data Storage and Output
Entering patient and lens data is simple and direct with the
large, easy-toread touch screen. No more small or 
unattached keypads to make data entry a chore. The

More...